2021 John Deere 331G

JOHN DEERE 331G, CAB, HEAT A/C, 2 SPEED, HIGH FLOW, ISO, CAMERA, 14PIN.
MoreLess
Limited Time Offer!

Selling Price -$71,500.00

2021 John Deere 331G

Features may include:

  • Vertical Lift Boom
  • The vertical-lift boom offers more lift height and reach at the top of the lift path, for more stability and truck-loading ability.
  • Engine
  • Final Tier 4 (FT4)/EU Stage IV diesel engine packs plenty of power and torque.
  • Unique Tri-Cool™ design resists debris buildup and employs large coolers for superior performance in severe, high-load conditions. Add a reversible fan for quick core cleanout in high-debris applications.
  • EH Boom Performance Package
  • Factory-installed performance package offers increased productivity and ease-of-use with the following capabilities:
  • Return to Dig allows the operator to automatically set the bucket or other attachment to his/her designated ready-to-work position.
  • Return to Carry allows the operator to use joystick detents to automatically reset the boom to a designated ready-to-carry position.
  • Boom Height Kickout allows the operator to pre-select a specific boom height based on truck/hopper height and use joystick detents to automatically stop at a specific height.
  • Electronic Self-Level allows the self-level to work on the boom up and down unlike the hydraulic self-level option that works only on boom up.
  • Onboard Grade Indication Option
  • This option, installed in-factory or in the field, provides cross-slope or roll and mainfall slope or pitch of the machine within the in-cab monitor display.
  • Easy-to-use
  • Real-time interface
  • Roll and pitch viewable as either “absolute” or “relative” values
  • Roll and pitch viewable in either degrees or percent
  • Stability
  • Boom design keeps the load close to the machine for better stability. Low center of gravity, 35-degree bucket rollback
  • Cab & Controls
  • Large entryway, tightly sealed swing-out door, and ample foot- and legroom simplify getting in, getting comfortable, and getting things done.
  • Industry-exclusive three-way switchable controls and electrohydraulic (EH) joystick performance package for even more operating flexibility.
  • Uptime
  • Generous tank capacity and fuel-efficient diesels enable daylong operation, letting you accomplish more between fill-ups.
  • Serviceability
  • Tilt up the hood for convenient ground-level access to dipsticks, fuel- and fluid-filler necks, and filters.
  • 2021
  • John Deere
  • 331G
  • Base
  • General
  • Model: 4TNV94FHT
  • Yanmar
  • Rating: Tier 4
  • Turbo. intercooled
  • 186.3 Inches³ (3.1 ltr)
  • 2500 rpm
  • Output - Net: 88.5 hp (66 kW) | Output - Gross: 91.2 hp (68 kW) | Hydraulic: 42.1 hp (31.402 kW) | Hydraulic - Option: 72.6 hp (54.168 kW)
  • 281.8 lbf / ft (382 Nm)
  • Rated Operating Capacity - Foundry: 3100 lbs (1407 kg) | Tipping Load - Foundry: 8857 lbs (4021 kg) | Breakout - Lift Foundry: 6000 lbf (26.6 kN) | Breakout - Bucket Foundry: 10325 lbf (45.9 kN)
  • Maximum: 7.8 mph (12.6 kph)
  • Pump: 23.5 gallons US / min (80 lt/min) | Pump - Option: 36.5 gallons US / min (138 lt/min)
  • Ground Bearing Foundry: 5.5 Psi (38.1 kPa) | System: 3450 Psi (237.87 bar)
  • Rear Departure Angle: 31 Degrees | Dump Angle: 48 Degrees | Rollback - Ground Level: 35 Degrees
  • Shoe: 15.8 inches (400 mm)
  • No Bucket: 122 inches (3100 mm) | Foundry Bucket: 146 inches (3710 mm)
  • No Bucket: 78.9 inches (2000 mm)
  • Top Of Cab: 86.7 inches (2200 mm) | To Hinge Pin: 132 inches (3350 mm) | Dump - Maximum Foundry: 106.1 inches (2690 mm)
  • 9.4 inches (240 mm)
  • Tank: 30 gallons US (114 ltr)
  • 11900 lbs (5403 kg)
  • Lift Geometry: Vertical
  • 1T0331GMKMF407613
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $71,500.00
  • Grand Forks
  • Pre-Owned
  • BLF407613
  • 2021
  • John Deere
  • 331G
  • Model: 4TNV94FHT
  • 937
  • Available
  • No Bucket: 78.9 inches (2000 mm)
  • Top Of Cab: 86.7 inches (2200 mm) | To Hinge Pin: 132 inches (3350 mm) | Dump - Maximum Foundry: 106.1 inches (2690 mm)
  • 1T0331GMKMF407613
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.