2017 Bobcat® E55

A71; HYD ANG BLD; DLX CAB; RADIO, DEPTH CHECK, BUCKET.
MoreLess
Limited Time Offer!

Selling Price -$65,000.00

2017 Bobcat® E55

The Bobcat® E55 compact excavator (mini excavator) is a conventional tail swing model with exceptional performance, dig depth and dump height. The conventional tail swing makes it easier to move your machine through tight spaces such as doors, gates, and onto trailers. The Tier 4-compliant E55 is available with clamp-ready extendable-arm configuration that provides additional length when fully extended. Gain ultimate reach without having to upsize the machine. An angle blade option is also available.

Features may include:
  • Powerful Hydraulics

Bobcat compact excavators deliver more hydraulic horsepower than other brands of the same size. More power means more performance under load. This performance advantage is easily measured in increased slew torque, faster cycle times and maximum auxiliary hydraulic performance. The end result is more work per hour in the toughest conditions and increased attachment performance.

  • Hydraulic X-Change System

For the most convenient attachment changes in the industry, choose the optional Hydraulic X-ChangeTM system. Activate the hydraulic pins at the press of a switch; retract for attachment removal or extend for attachment hook up. Hydraulic X-Change maintains optimal “pin-on” bucket geometry so arm and bucket forces are not compromised.

  • Extendable Arm

If you need more reach from your compact excavator, the extendable-arm option may be just what you need. As needed, the arm can be hydraulically extended up to 30 in., and then retracted to its standard position for maximum arm force and lift performance. The extendable arm cylinder is powered by the primary auxiliary circuit, and a paddle on the right-hand joystick controls the extension and retraction of the arm.

  • Selectable Auxiliary Hydraulic Flow

Many Bobcat® compact excavators are equipped with selectable auxiliary hydraulics. Three flow rates help you optimize the response of hydraulic attachments such as PowerTilt® and Hydra-Tilt™ swing accessories, clamps, grapples, hydraulic breakers and auger attachments. Select low flow for precise control, medium flow for placing or handling materials, or maximum flow for peak hydraulic attachment performance.

  • Angle Blade

Compact excavators have always had backfill blades for backfilling, but the angle blade option gives you more flexibility. It provides simultaneous up/down and angle adjustment, up to 25 degrees left or right. The Bobcat bolt-on replaceable cutting edge that is easy to rotate and simple to replace, providing lower operating costs.

  • Selectable Control Pattern

Easily change between “excavator” and “backhoe” patterns. No keys are required.

  • Auto Idle

Auto Idle makes it easier – and quieter – to pause your work, take a quick break or communicate on the jobsite. You’ll save fuel too. When machine functions aren’t used for more than four seconds, the machine automatically idles the engine until work resumes. When you move the joystick controls or initiate travel, the excavator automatically returns to the previously set throttle position. Auto idle can be enabled or disabled as needed.

  • Auto Shift

Auto-Shift travel shifts the machine out of high range and back automatically, offering superb travel performance without having to manually downshift. It automatically transitions the travel motors to and from high range, giving you greater tractive effort with no manual shifting. Simply select the travel speed range and go. A directional lug track also provides a smoother ride and less vibration when traveling.

  • 2017
  • Bobcat®
  • E55
  • Base
  • Compact
  • 49.8 hp
  • Diesel
  • 2500 rpm
  • Tier 4
  • class: 5.6 t
  • 12313 lbs
  • Travel Speed - High: 3.1 mph | Travel Speed - Low: 1.9 mph
  • Arm Digging Force: 5751 lbf | Bucket Digging Force: 8977 lbf
  • Rated Lift Capacity: 4999 lb | Maximum Reach at Ground Level: 20 ft.
  • 21.1 gal
  • Auxiliary Std Flow: 20 gal/min | Auxiliary Pressure: 3045 psi
  • 206.4 in. | overall lenght in travel position: 206.4 in.
  • 77.2 in.
  • 100 in. | with operator Cab: 100 in. | Max Dump: 13.6 ft.
  • Lift Radius: 118 in.
  • Boom Swing - Left: 75° | Boom Swing - Right: 50°
  • 12.9 ft.
  • Air Conditioning, Cab Enclosure, Cab Heater, Heater Air Conditioning, Engine Shutdown, Auxiliary Hydraulics, Quick Tach System, Rubber Track, Selectable Auxiliary Hydraulic Flow.
  • AJ1912336
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $65,000.00
  • Grand Forks
  • Pre-Owned
  • BM1912336
  • 2017
  • Bobcat®
  • E55
  • 1242
  • Diesel
  • Available
  • 77.2 in.
  • 100 in. | with operator Cab: 100 in. | Max Dump: 13.6 ft.
  • AJ1912336
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.