2017 Exmark Radius E-Series RAE708GEM48300

LIKE NEW EMARK E-SERIES 48" ZEROTURN
MoreLess
Limited Time Offer!

Selling Price -$4,500.00

2017 Exmark Radius E-Series RAE708GEM48300

These are the new Radius mowers. From Exmark.

The Exmark E-Series provides the best of both worlds: The commercial grade features lawn professionals need, like 3-Series (5” deep) UltraCut decks, maintenance-free spindle assemblies and a powerful Exmark 24.5 HP, 708cc V-twin engine, while delivering value that makes this zero turn mower attractive to anyone with a lot of grass to mow.

Features may include:
  • UltraCut Deck Technology

Exmark’s exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.

  • Heavy Duty Unibody Frame

Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.

  • Quick Adjustable Rollover Protection System (ROPS)

Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.

  • Fuel Gauge Window

Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.

  • Height of Cut Made Easy

The height of cut is positioned to provide an open operator platform that allows the operator to quickly locate the preferred cut position when viewing from the top down.

  • Large Caster Tires

Every Radius model is equipped with large front caster tires. 13” x 6.5” pneumatic tires come standard on all Radius models.

  • Powered by Exmark Engine

Equipped with Exmark’s commercial-grade 24.5-horsepower 708cc V-Twin engine that features a dual barrel carburetor, cast iron cylinder liners and a quick oil drain hose raises the bar for productivity, durability and value.

  • 2017
  • Exmark
  • Radius E-Series
  • RAE708GEM48300
  • Riding
  • 708
  • Exmark | V-Twin
  • Carbureted
  • 3,600 rpm | Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.0 kmph) reverse.
  • 708 cc.
  • Standard Engine Manufacturer's air filter
  • Gas Carbureted | Fuel Indicator: Translucent Visual
  • 81.7 in (207.5 cm)
  • 59.5 in (151.1 cm) | Cutting Deck: 48"
  • 69.7 inches (177.0 cm) | Cutting: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
  • Deck: 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. | Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
  • 3 Blades at 16.25" Length | Spindles: No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive.
  • Blade Tip Speed: Approximately 18,500 fpm.
  • MagStop electromagnetic 125-ft-lb clutch
  • 12-volt battery with 15-amp alternator.
  • Lever-actuated pawl brake.
  • Hydro-Drive | Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
  • Allows unit movement without engine running.
  • Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
  • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
  • Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
  • 7-gallon (26.5-L) single fuel tank with single fill location.
  • 22 x 9.5-12 K500
  • 22 x 9.5-12 K500
  • .375" thick caster yoke arms | Front Caster Tires: 13 x 6.5-6, smooth tread, pneumatic. Bushings
  • 849 lbs.
  • Cup Holder | 2-post foldable ROPS standard with seat belt and latch.
  • Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • High back seat with foam padded seat cushion, armrests and integral safety switch
  • 405346323
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $4,500.00
  • Devils Lake
  • Pre-Owned
  • GM5346323
  • 2017
  • Exmark
  • Radius E-Series RAE708GEM48300
  • 708
  • 20
  • Gas Carbureted | Fuel Indicator: Translucent Visual
  • Available
  • 59.5 in (151.1 cm) | Cutting Deck: 48"
  • 69.7 inches (177.0 cm) | Cutting: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
  • 405346323
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.