2019 Case CE Skid Steer Loaders SV340

HIGH FLOW, 2 SPEED, SJC, HEAT/AC.
MoreLess
Limited Time Offer!

Selling Price -$55,000.00

2019 Case CE Skid Steer Loaders SV340

SV340 SKID STEER LOADER

With a 3,400 lb ROC the CASE Tier 4 Final SV340 skid steer loader is a productivity beast. With a higher-rated operating capacity than the Deere 332E, stronger breakout force and our superior high-flow auxiliary system, the SV340 runs heavy attachments with better handling, supplies better loading capacity and delivers greater overall performance.

Features may include:

Productivity

The SV340 features increased hydraulic performance thanks to increased High Flow system pressure to 3,450 psi, a stronger lift arm, H-link, and upper chassis. The CASE exclusive 4,000 psi Enhanced High-Flow (EHF) auxiliary hydraulic system is also available. The manifold valves have been changed to ductile iron (from aluminum), and both the hose material and tube wall thickness have been improved. The SV340’s gear pump has a higher-pressure rating and its auxiliary loader circuit has been upgraded to O-ring Face Seal (ORFS) fittings (was JIC). Additional counterweights add stability and a new tire offering is available.

Fuel Efficiency

The SV340 employs a powerful SCR Tier 4 Final solution. Because SCR is an after-treatment system, it lets the engine breathe easier and run at peak performance, which translates to maximum power, lower operating temperatures and greater fuel efficiency. Plus, SCR is simple. No new filters. Just pour a little DEF (Diesel Exhaust Fluid) and go. A large, 25.5-gallon (96.5L) fuel tank also enables this skid steer to run all day without refueling. No regen to deal with or a costly DPF filter to replace.

Comfort/Visibility

Visibility and comfort remain exceptional with a sealed, 25% larger cab and thin wire side-screen design as well as a large, rounded rear window that provides an expansive glass surface area and a 360° view. Superior stability can be had even in the roughest of terrains with our Ride Control™ feature while nighttime visibility is enhanced with our exclusive side lighting.

Serviceability

When you buy a CASE, you want it to last. We make it easy. That’s why on our skid steer loaders, routine service points are all located at the rear of the machine, so you can quickly access the engine, filters, fill points and whatever you need to properly maintain and extend the life of the machine. On top of that, we also offer our famous easy-tilt cab for convenient access to the drivetrain compartment.

Base & Extended Warranty Coverage
  • 1 Year / Unlimited Hour Full Coverage Base Warranty
  • 2 Year / 2,000 Hour Extended Warranty at No Charge
  • 2019
  • Case CE
  • Skid Steer Loaders
  • SV340
  • General
  • FPT F5B FL413 E B002
  • Tier 4 Final
  • @ 2800 RPM – SAE J1349: Gross - 90 hp (67 kW), Net - 84 hp (63 kW)
  • Peak @ 1400 RPM: 282 lb·ft (383 N·m)
  • High idle – no load: 2500 +/- 25 rpm | Rated – full load: 2500 Rpm | Low idle: 1150 +/- 25 rpm
  • #: 4
  • 207 in3 (3.4 L)
  • 3.9 in (99 mm)
  • 4.3 in (110 mm)
  • Type: Direct drive countershaft Powershift w/ electronic shift control and inching pedal
  • Travel: Low range - 7.7 mph (12.4 kph)
  • Water | Implement: Gear
  • Water pump: 47.8 gpm (181 L/min) | Drivetrain: @ rated engine RPM: @ 97% efficiency - 29.4 gpm (111 L/min) | Standard @ rated engine RPM: @ 100% efficiency - 24.2 gpm (91.5 L/min)
  • Charge: 360 psi (24.5 bar) | System relief: 5,220 psi (360 bar)
  • Maximum dump angle: 46.7° | Angle of departure: 23.5°
  • Operating: with foundry/excavating bucket - 160.4 in (4.07 m), with low profile bucket - 166.0 in (4.22 m), with low profile extended bucket - 169.5 in (4.30 m)
  • Dump: with foundry/excavating bucket - 103.5 in (2.63 m) @ 45°, with low profile bucket - 164.4 in (4.18 m) | Reach at maximum with low profile bucket: 29.3 in (0.74 m) @ 45°
  • without attachment with coupler: 119.1 in (3.02 m) | F. with foundry/excavating bucket on ground: 144.0 in (3.66 m) | with low profile bucket: 147.3 in (3.74 m) | with low profile extended bucket: 153.1 in (3.89 m)
  • Over the tire spec tires: 69.6 in (1.77 m)
  • bottom of belly pan: 8.0 in (0.20 m)
  • 52.0 in (1.32 m)
  • Voltage: 24 Volts, negative ground | Starter: 4.29 hp (3.2 kW)
  • 160 amp
  • 12-volt low-maintenance 1,000 cold-cranking amps @ 0° F (-18° C°)
  • Spring-applied, hydraulic release multiple disc.
  • 25.5 gal (96.5 L)
  • Engine w/ filter: 8.9 qt (8.5 L)
  • Hydraulic system: Total - 11.75 gal (44.5 L), Reservoir - 6.0 gal (22.7 L)
  • Add-on Side cab glass: 47 lb (21.3 kg) | Polycarbonate cab door: 75 lb (34.0 kg) | Glass cab door w/ wiper: 75 lb (34.0 kg) | Suspension seat: 22 lb (10.0 kg) | Additional counterweight: 300 lb (136.0 kg)
  • 8,557 lb (3 890 kg)
  • Unit equipped w/ open cab; 165 lb operator; 78 in Heavy-Duty bucket; full of fuel; 14 x 17.5 tires: 9,100 lb (4 136 kg)
  • JAFSV340CKM472291
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $55,000.00
  • Williston
  • Pre-Owned
  • BLM472291
  • 2019
  • Case CE
  • Skid Steer Loaders SV340
  • FPT F5B FL413 E B002
  • 650
  • Available
  • Over the tire spec tires: 69.6 in (1.77 m)
  • Dump: with foundry/excavating bucket - 103.5 in (2.63 m) @ 45°, with low profile bucket - 164.4 in (4.18 m) | Reach at maximum with low profile bucket: 29.3 in (0.74 m) @ 45°
  • JAFSV340CKM472291
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.